PRODUCTS
Selected Filters:
Carbocrylic
-
Altra~Etch
Features:
- Excellent adhesion to most common metals: Galvanised steel, zinc sheet, aluminium sheet & extrusions, mild steel, zinc & aluminium spray
- Versatile, convenient, stable single pack primer
- Fast drying
- Good abrasion resistance
- Compatible with a wide variety of topcoats
Description:
Altra~Etch is a single pack etch primer, conforms to AS 3884 Type 1 and AS 3750.17 Type 1. A single component, versatile etch primer suited to many light industrial and marine applications and may be top-coated with most finish coats. May be used as a pre-fabrication holding primer.
-
Altra~Floor EF
Features:
- Self-priming on suitably prepared concrete, or over suitably primed surfaces
- Low odour
- Low viscosity
- Low VOC / High solids
- Solvent-free
- Can be top coated with Carbothane 133 LH or E~Line® series - Refer to Technical Services for further advice
- Resistant to hydraulic fluids and Skydrol once fully cured
- Tested to AS 4586:2013, Slip resistance classification of new pedestrian surface materials - Refer Certification section for more information.
Description:
A high-performance, multi-purpose flooring epoxy coating that is easy to apply. It’s ideal for use in many flooring environments such as workshops, warehouses, factories, washrooms etc. Available in a variety of standard colours.
-
Carbocrylic 1295 HS
Features:
- Offers excellent corrosion and weathering protection.
- NORSOK Approved for offshore
- Recommended for chemical industry, offshore, power and heavy industry.
Description:
Carbocrylic is a high solids topcoat with good weathering capabilities. Offers a glossy, smooth, hard finish that is easy cleanable. One coat application capable.
-
Carbocrylic 3358
Features:
- Single component
- Resistant to flash rusting
- Outstanding corrosion protection
- Low odor, low VOC
Description:
Surface tolerant direct-to-metal primer with excellent corrosion resistant properties, resistance to flash rusting and suitability for SPPC-SP2 and SP3-cleaned steel.
-
Carbocrylic 3359
Features:
- Multi-purpose interior/exterior coating
- Excellent color and gloss retention
- Single component
- Outstanding corrosion protection
- Low odor, low VOC
- Acceptable for use in USDA facilities
Description:
Versatile high performance finish with excellent corrosion resistance and exterior weathering properties.
-
Carbocrylic 3359 DTM
Features:
- Smooth, attractive, high build finish
- Excellent weatherability, gloss and color retention
- Low odor
- Excellent corrosion protection
- Meets most VOC (Volatile Organic Content) regulations
- Excellent resistance to flash rusting
- Outstanding application characteristics
- Dry-fall* properties
- Suitable for use in USDA inspected facilities
Description:
A single-component durable, high performance direct-to-metal acrylic coating for use where excellent weathering properties and chemical resistance are required. Use as a direct-to-metal acrylic coating for tank exteriors, piping, and structural steel, as well as other exterior and interior uses. May also be used as a finish coat over recommended primers.
-
Carboguard 1340
Features:
- Exceptional wetting characteristics
- Low stress, highly flexible film
- Very high solids
- Low odour
- Approved for use in food & dairy processing plants (refer to "Approvals NZ/AU" section)
- Compatibility with other coatings & membranes makes 1340 ideal for use as a curing membrane in concrete tanks & bunds
- Also used as moisture barrier coating over Thermo-Lag EPFP systems
- User-friendly brush & roller application
Description:
Penetrating primer/sealer for use on concrete substrates and Carboline Pyrocrete Fireproofing products. It performs extremely well in sealing cementitious surfaces and is designed to receive a variety of different generic types of finish coats. Some recommended uses of 1340 include the use as a curing compound or form release agent. When applied to “green” concrete it will retard the escape of moisture during the cure period. It is also excellent for use as a form release coating on plywood or steel forms.
-
Carboguard 2929
Features:
- Isocyanate free
- Early through-curing
- User friendly wet edge characteristics - cuts over-spray ‘flashing’
- Excellent colour and gloss** retention
- Good chemical resistance
- Good chalk resistance
- Excellent durability
- Excellent aged self re-coat
Description:
Fast cure iso-cyanate-free epoxy-acrylic gloss coating for industrial and marine and off-shore applications where use of polyurethane coatings is banned or undesirable.
-
Carboguard 504
Features:
- Excellent primer for water and many aqueous chemicals immersion service when topcoated with an approved finish
- Excellent adhesion to difficult substrates
- Excellent holding primer
- Excellent corrosion resistance
- Complies with AS/NZS 3750.13 (2 pack epoxy primer), Types 1, 2 & 3.
- Approved for use in NZ Food Processing Plants (see "Approvals NZ/AU" section)
- AS4020 Potable Water Approval (see "Approvals NZ/AU" section)
- Good abrasion resistance
- Very good aged re-coatability
- Resists splash and spillage or fumes of a wide range of chemicals
- Easy application by brush, roller or spray
- Ideal tie-coat over inorganic zincs
- Versatile - can be used on most substrates under many different types of topcoat
- Long pot-life
- Excellent maintenance touch-up primer for hand-cleaned substrates
- A user-friendly primer for epoxy or polyurethane systems in environments not suited to zinc primers due to acidic or alkaline fallout or splash & spill
- Excellent tie-coat over high build epoxies as an extended 2-3 day recoat window with Sea~Barrier Antifoul series – Carboguard 504 Grey is preferred. Refer to Technical Services for further advice
Description:
A high performance, immersion grade (fresh & salt water) chemically cured epoxy primer. Suitable for use over suitably prepared mild steel, galvanised steel, other non-ferrous metals, and most GRP substrates.
-
Carboguard 510 SG
Features:
- Epoxy modification improves chemical resistance for wastewater environments
- Trace VOC - <12 mg / lt, EPA Method 24)
- Water based, low odour
- Excellent film strength, abrasion, and impact resistance
- Easily topcoated to provide additional chemical resistance or appearance
- Self-priming over concrete
- Aggregate reinforced
Description:
A spray-grade, economical, epoxy-based repair mortar, patching and surfacing compound that exhibits excellent bond strength to concrete and other masonry surfaces. It is ideally suited for resurfacing deteriorated concrete in wastewater environments. Topcoated with Carboline's lining systems provides protection from H2S or MIC. Unique spray grade (SG) formulation speeds application properties for quick turnaround projects.
-
Carboguard 635
Features:
- Low temperature cure (-7°C)
- Excellent corrosion protection
- Excellent application characteristics
- Fast recoat times
- Moisture tolerant during application
- Extended self recoat window for normal atmospheric exposures (6 month self recoat)
- Approved for use in food & dairy processing plants (refer to "Approvals NZ/AU" section)
- Tested & approved primer under Nullifire intumescent base-coats
Description:
An all-purpose immersion-grade epoxy that has a variety of attributes including low-temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection. Can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. May also be used for immersion in fresh or salt water (marine) exposures.
-
Carboguard 635 HAR
Features:
- Low temperature cure -7°C (20°F)
- Excellent corrosion protection
- High abrasion resistance
- Excellent flexibility
- Excellent application characteristics
- Fast recoat times
- Moisture tolerance during application
- Extended re-coat window for atmospheric exposures up to 6 months self re-coat
- Approved for use in food & dairy processing plants (refer to "Approvals NZ/AU" section)
Description:
An all-purpose epoxy that has a variety of attributes including low-temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection. Carboguard 635 HAR can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. It is suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. It may also be used for immersion in fresh or salt water (marine) exposures and exhibits exceptional abrasion resistance & toughness.
-
Carboguard 636 XT GF
Features:
- Excellent physical and barrier properties
- Versatile surface tolerant coating
- Good adhesion to tight rust - especially when used in conjunction with Rustbond PS or Altra~Lock 576
- Tolerant to surface dampness - particularly when brush/roller applied
- Fast dry to recoat
- Excellent dry to handling properties
- Suitable for fresh and salt water immersion
- Low temperature cure to below freezing; down to -5°C
- Reduced HAPS and low VOC
- Cleaner colours and improved colour stability
Description:
A glass-flake filled, multi-purpose,advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility. Glass flake reinforcement enhances film strength, impact resistance and barrier properties.
-
Carboguard 640
Features:
- Excellent barrier protective properties
- Recommended for permanent fresh & salt water immersion
- Exceeds performance of coal tar epoxy coatings
- Over 35 years failure-free case history in permanent fresh-water immersion service
- Good abrasion resistance
- High volume solids
- Suitable for use on concrete surfaces
- Can be self-priming
- Easy application - thick films may be applied in one application by airless spray
- Non-bleeding
Description:
An ideal high performance, high build coating for any service or structure, marine or industrial, where water or corrosion resistance is required. Has excellent proven long-term service case histories for marine hull externals, above & below water, and as a lining for hydro penstocks, gates, and similar permanently immersed structures. Carboguard 640 is the barrier coating of choice under Sea~Barrier® 1000 and 3000 antifoulings.
-
Carboguard 696 HBE
Features:
- High film builds in a single coat – 0.4mm to 1.5mm
- Extensive case history in hydro penstocks & scroll casings, along with industrial wastewater processing
- Positive cure, even at low temperatures
- Highly abrasion resistant
- Unique flexibilised formulation imparts excellent impact resistance
- May be used on buried structures, structures immersed in fresh or salt water, and for atmospheric exposure
- Suitable for use with cathodic protection systems – impressed current or anode types
- Easy application qualities using properly heavy-duty airless spray equipment
Description:
Suitable for single coat applications in areas such as a penstock lining at film thicknesses ranging between 400 and 1500 microns. Suitable for service in various immersion environments including industrial wastewater, slurry tanks, sea or fresh water, on buried structures, and on high wear surfaces in atmospheric exposure.
-
Carboguard 893 SG
Features:
- Ready to apply after mixing; no sweat-in time or thinning required.
- Economical fit for use epoxy
- Available in a variety of rapid tint colors
- Attractive low sheen for tank exteriors
- Used as a primer, intermediate, or finish coat
- Power tool cleaned surfaces acceptable
- Optional low temperature (LT) cure Part B
- VOC compliant to current AIM regulations
Description:
Versatile corrosion resistant coating. Used either as a primer, intermediate coat, or self-priming finish over steel and zinc primers. Carboline glass flake additive may be added to improve performance including internal strength, hardness, impact, and abrasion resistance. May be topcoated with itself, or a broad variety of high performance finish coats. Product also has surface tolerant properties. Use optional (LT) cure for low temperature cure down to 35°F (1.7°C).
-
Carboguard® 636 XT
Features:
- Very good flexibility – resists chipping and aged embrittlement
- Versatile surface tolerant coating
- Suitable for application over surfaces prepared by water-jetting
- Good adhesion to tight rust - especially when used in conjunction with Rustbond PS or Altra~Lock 576
- Tolerant to surface dampness - particularly when brush/roller applied
- Self-priming (DTM) for many applications
- Fast dry to recoat
- Excellent dry to handling properties
- Suitable for fresh and salt water immersion
- Low temperature cure to below freezing; down to -5°C
- Reduced HAPS and Low VOC
- Cleaner colours and improved colour stability
Description:
A multi-purpose, advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility.
-
Carbomastic 15
Features:
- Unique formulation with lamellar aluminum flakes for exceptional barrier protection
- Excellent performance over minimal surface preparation of steel substrates
- Suitable as a topcoat for most tightly adhered existing coatings
- Excellent choice for field touch-up of zinc-rich primers and galvanized steel
- Available in a low temperature cure version (Carbomastic 15 FC)
- Suitable for use under insulation on hot surfaces operating up to 300 °F (150 °C)
- VOC compliant to current AIM regulations
Description:
Aluminum pigmented, low-stress, high-solids mastic with a proven field history. This unique formulation incorporates lamellar aluminum pigment for superior barrier protection. Carbomastic 15 was the pioneer mastic coating in a number of industrial markets and today still provides unmatched levels of barrier protection and corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3-cleaned steel.
-
Carbomastic 615
Features:
- High solids, low VOC
- Low temperature cure
- Excellent wetting properties
- Excellent surface tolerance
- Excellent moisture tolerance (application)
- Fast cure response
- Suitable for immersion service in fresh or salt water after 60 minute cure at 24°C
- Approved for use in food & dairy processing plants (refer to "Approvals NZ/AU" section)
Description:
High performance epoxy that has excellent resistance to fresh and salt water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. It contains an inert flake reinforcement (micaceous iron oxide) to enhance film strength and performance. This product is ideal for industrial or heavy duty marine environments for the protection of steel against salt laden environments.
-
Carboquick 200
Features:
- Fast cure speeds the painting process
- High build, 150 to 250µm DFT per coat
- Excellent corrosion protection
- Meets ISO 12944-6 C3 High, one coat applied DTM
- Saves significant time, labour and money
- Excellent weathering
- Exceeds SSPC Coating Specification No. 39 Level 3A, highest level for aliphatic polyurea
- Exceeds SSPC Coating Specification No. 36 Level 3A, highest level for aliphatic polyurethane
- Very good flexibility and elongation
- Excellent abrasion and impact resistance
- Excellent wetting and adhesion
- Extremely durable to help provide long service life
- Low VOC and low HAPS
- Indefinite recoatability
- Successful case history for use as a quick-turn line marking system. Refer to your local representative for further information.
Description:
This fast cure high build polyaspartic coating provides excellent corrosion protection as well as long term weatherability in just one coat. It can be applied direct to metal (DTM) at 150 to 250 microns dry film thickness (DFT) to eliminate the need for typical primers and/or intermediate coats. This significantly speeds up the painting process, saves labour, and saves money without sacrificing performance. If even better corrosion protection is desired it can be applied over our time proven Carbozinc or Carboguard primers.
-
Carbothane 130 Clear Coat
Features:
- High solids, low VOC content
- Excellent weatherability
- Advanced HALS & UV absorber technology
- Superior impact and abrasion resistance
- Excellent chemical resistance
- Excellent resistance to graffiti removers
- Tested and in compliance to Main Roads WA - Specification 908 and NZTA (Waka Kotahi) - Specification S10 for Anti-Graffiti Coatings (refer to "Approvals NZ/AU" section)
- Approved for use in food & dairy processing plants (refer to "Approvals NZ/AU" section)
Description:
Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets including marine exposure where ultra durable colours are desired. Carbothane 130 Clear Coat provides a smooth, high gloss durable finish that provides superior resistance to colour fade of basecoats.
-
Carbothane 133 LH
Features:
- Outstanding performance properties in both mild and aggressive environments
- High build; suitable for many two-coat systems
- Approved for use in food & dairy processing plants (refer to "Approvals NZ/AU" section)
- Application by spray, brush or roller
- Indefinite recoatability
- Low HAPs content
Description:
High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colours.
-
Carbothane 134 HG
Features:
- High solids, low VOC content
- Excellent weatherability
- Exceeds SSPC Paint 36 specification for a Level 3 urethane
- Conforms to the requirements of AS/NZS 3750.6:2009, Type 1 "Paints for Steel Structures - Full Gloss Polyurethane (two pack)"
- Approved for use in food & dairy processing plants (refer to "Approvals NZ/AU" section)
- Excellent flow characteristics allow for application by spray or roller
- Superior impact and abrasion resistance
- Indefinite recoatability
Description:
Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.
-
Carbotherm 3300
Features:
- Excellent thin-film insulation
- Unique formula provides superior coverage during application
- Protects personnel from hot surfaces
- Multi-purpose interior/exterior coating
- Insulation provides anti-condensation properties
- Easy to use
- Zero VOC; Low odour
- May be applied to hot surfaces
Description:
Carbotherm 3300 is a ceramic blend insulative composite coating formulated in a high temperature resistant acrylic binder. It is ideally suited as a protective heat barrier to shield personnel from hot surfaces. It also inhibits heat transfer into or out of a structure. Its insulative properties keeps structures exposed to solar radiation significantly cooler. It can be used to minimize or eliminate sweating of pipes or other operating equipment.
-
Carboweld 11
Features:
- Welds made over Carboweld 11 coated steel are equal in every respect to welds made to uncoated steel.
- Designed to protect steel during construction phase of projects under normal conditions.
- Can be topcoated for additional long term protection for atmospheric exposures.
- Weld spatter does not adhere to or damage the coating.
- Can be welded as quickly and easily as bare steel at production line speeds without loss in strength or consistency of the weld.
- Dries to touch and to handle in 3 to 5 minutes.
Description:
A weldable pre-construction inorganic zinc primer for shop use only.
-
Carboxane 2000
Features:
- Isocyanate free
- Exceptional weatherability
- Outstanding colour and gloss retention
- Exceeds SSPC Coating Specification No. 36 Level 3A
- Excellent corrosion protection
- Meets ISO 12944 C3 High and C4 Medium, one coat applied at 125 to 175 microns DFT
- High build, 75 to 175 microns DFT
- Saves significant time, labour, and money
- Long service life
- VOC compliant
- Excellent durability
- Good flexibility and abrasion resistance
- Long pot life
Description:
Carboxane 2000 is an isocyanate-free, ultra-durable coating that provides outstanding colour and gloss retention as well as excellent corrosion protection for exterior exposures. When used over a suitable primer (as a two coat system) Carboxane 2000 provides the barrier, corrosion resistance properties, and weatherability normally achieved with a three-coat system (primer, epoxy intermediate with an acrylic-polyurethane finish) for most environments. This significantly speeds up the painting process, saves labour, and saves money without sacrificing performance. This tightly cross-linked film utilises a UV-resistant siloxane binder resulting in a finish with excellent corrosion protection and weathering performance that far exceeds aliphatic polyurethanes.
-
Carbozinc 11
Features:
- Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
- Rapid cure. Dry to handle in 45 minutes at 16°C (60°F) and 50% relative humidity.
- Low temperature cure down to -18°C
- High zinc loading
- Meets FDA requirements
- Zinc supplied meets ASTM D520 (Type II)
- Meets SSPC Paint 20 Type I, Level 1 for zinc content
- Complies with the composition and performance requirements of AS/NZS 3750.15, Type 4 and AS 4848.1 "Single Coat Inorganic Zinc Silicate"
- Very good resistance to salting
- May be applied with standard airless or conventional spray equipment
- Approved for use in food & dairy processing plants (refer to "Approvals NZ/AU" section)
Description:
Time-tested corrosion resistant primer that provides excellent corrosion protection to steel in some of the harshest environments. For over five decades, Carbozinc 11 has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide.
-
Carbozinc 11 WB
Features:
- Excellent corrosion protection
- High zinc loading per square foot
- Zero VOC
- Good resistance to salting
- Fast curing, quick handling
- Excellent application characteristics (less likely to pump packing or tip plugging)
- Meets Class B slip coefficient* and creep testing criteria for use on faying surfaces.
- Conforms to AS/NZS 3750.15 Type 3
Description:
Carbozinc 11 WB is a water-based inorganic zinc rich primer that protects steel galvanically, eliminating subfilm corrosion. It meets VOC regulations while providing the proven performance of silicate zinc rich technology. It may be used as a primer under many different types of topcoats.
-
Carbozinc 15-625
Features:
- Exceptional corrosion resistance
- Extremely high zinc loading - 90% by weight in dry film
- Provides excellent cathodic protection
- Excellent adhesion to commercial blast cleaned surfaces
- Excellent for repairs to inorganic zinc silicate primers and aged/deteriorated galvanising
- Meets the requirements of AS/NZS 3750.9, Type 2 Organic Zinc Rich
- Conforms to the composition and performance requirements of SSPC-Paint 20 Type II Organic
- As a brush applied maintenance primer tolerant to traces of surface moisture
- As a holding / weld-through primer when applied less than 25 microns dry
Description:
A high performance, two component, organic zinc-filled primer specifically formulated to provide corrosion protection to steel surfaces in salt and weathering environments. It has good surface tolerant characteristics where steel surface preparation may be less than ideal. It may also be used for the repair of aged inorganic zinc-rich coatings or galvanised steel surfaces.
-
Carbozinc 858
Features:
- Protects steel galvanically
- Outstanding application properties
- Cures at low temperatures down to 2ºC
- Complies with AS 3750.9:1994 Type 2 Organic Zinc Rich
- Suitable for application over Wet Abrasive Blast cleaned surfaces
- Protects against corrosion under-cutting
- Tough and abrasion resistant film
- Ideal for severe industrial or marine environments with appropriate topcoats
- Approved for use in food & dairy processing plants (refer to "Approvals NZ/AU" section)
Description:
A high-solids, zinc-filled epoxy primer for corrosion protection of structural steel in salt and weathering environments. This high performance primer has quick cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. It has excellent adhesion and undercutting resistance and is outstanding for use as a corrosion resistant primer for a variety of applications.
-
Carbozinc 858 (3K)
Features:
- Protects steel galvanically
- Outstanding application properties
- Cures at low temperatures down to 2ºC
- Tough and abrasion resistant film
- Wide use in severe industrial or marine environments
Description:
A high-solids, zinc-filled epoxy primer for corrosion protection of structural steel in highly corrosive environments including offshore, marine and industrial. This low VOC, HAPs compliant primer has quick cure-to-topcoat characteristics for in-shop applications and quick turnaround capabilities for the field. It has excellent adhesion and undercutting resistance and is outstanding for use as a corrosion resistant primer for a variety of applications.
-
Carbozinc 859 EZ2
Features:
- Excellent application properties
- Tough abrasion resistant film
- Excellent adhesion & undercutting resistance
- Superior corrosion resistance
- Meets VOC (Volatile Organic Content) regulations, <335 g/litre
- Fast drying for recoat
- Meets or exceeds SSPC Paint System 20 Level 3 (2002)
- Excellent film forming properties eliminate topcoat blistering
- Excellent resistance to salting on weathering exposure
Description:
A two-component, high solids, zinc rich epoxy primer formulated for the protection of properly prepared steel substrates. Carbozinc 859 EZ2 can be applied by conventional or airless spray. Recommended where a high performance, highly corrosion resistant zinc primer is desired. Typical applications include structural steel, tanks, piping, equipment and other miscellaneous parts in industrial or architectural projects.
-
Multi-Gard 955 CP
Features:
- Low odour
- Very high solids
- Excellent wetting and flow properties
- Easy 1:1 mix ratio
- One coat system for a variety of substrates including CMU
- VOC compliant to current AIM regulations
Description:
A solvent-free epoxy designed and uniquely formulated for use as a coating for aluminum casting quench pit environments. It has been tested by the Aluminum Association and found suitable for this use. In many cases it can be used as a one-coat system direct to steel or concrete. Has excellent wetting and flow properties and can be spray, brush or roller applied. It has a workable pot life (90 minutes at 24°F) and while plural spray equipment may be used, it is not required.
-
Multi-Gard GP 48(AU)
Features:
- Direct-to-metal (when used with GP 88 Part B)
- Fast dry and handle times
- Excellent abrasion and chemical resistance
- Excellent gloss and colour retention
- Suitable for OEM applications
- Excellent aged re-coatability when cleaned with Altex P40 Cleaner
- Applied by air, or airless spray
Description:
Available in Australia only; Multi-Gard GP 48 is fast-dry polyurethane coating which provides a high gloss finish which has excellent corrosion, abrasion and chemical resistance.
-
Phenoline 1205
Features:
- Excellent resistance to ethanol, gasoline, jet fuels, and solvents
- Excellent abrasion resistance
- Excellent thermal shock resistance (-17 to 150°C)
- Excellent resistance to deionized or demineralized water up to 95°C.
- Excellent resistance to crude oil up to 121°C
- Excellent for crude oil storage and transportation up to 121°C
- Recommended for CS-1,3,4 and SS-1,2,3 systems of NACE SP0198 Standard Practice for coatings to control Corrosion Under Insulation (CUI)
- Approved for use in food & dairy processing plants (refer to "Approvals NZ/AU" section)
Description:
Glass flake-filled coating with dense cross-linking that exhibits excellent overall chemical resistance to a variety of aggressive chemicals. Glass reinforcement provides added abrasion resistance, permeation resistance and internal reinforcement. 1205 exhibits very good acid resistance. Excellent for use as a lining for tanks or pipes in process facilities where hot water or abrasive conditions exist.
-
Phenoline 187 Primer & Finish
Features:
- Excellent chemical resistance
- Very good abrasion resistance and flexibility
- Tested and approved for use as a tank lining for all aviation fuels; reference Air BP Technical Approvals Equipment & Materials manual
- Meets all performance requirements of: DOD-P-23236 Type 1, Class 1 Phenoline 187 Primer & 187 Finish system
- Under insulation performance to 204°C (400°F)
Description:
Highly cross-linked coating with exceptional chemical resistance. Widely used as a tank lining system in the petrochemical industry as well as in other aggressive immersion conditions like jet fuel, municipal and industrial wastewater.
-
Phenoline 311 Primer
Features:
- Approved for potable water, ANSI/NSF standard 61*
- Approved for potable water, AS/NZS 4020: 2005 - taint-free at 1000 mm2 / litre; contaminant-free at 15,000 mm2 / litre
- Low temperature cure -7°C
- Excellent blast-hold protection
- Suitable for use over damp concrete
- Excellent application characteristics
- Fast recoat times
- Moisture tolerance during application
Description:
A tank lining holding primer that has a variety of attributes including low-temperature cure, fast recoat times, moisture tolerance during application and cure, and excellent blast-hold protection. Phenoline 311 Primer is often used with thick film lining systems as a holding primer (maintain blast cleaning) and is suitable for both new tanks and relines. It exhibits excellent surface wetting characteristics and quick cure for handling. It contains high levels of inert flake reinforcement. Excellent for use as a bonding primer for linings when damp concrete or masonry substrates are encountered.
-
Phenoline 341
Features:
- Single coat, high performance protection
- Low to no odour
- Easy to apply by standard equipment
- Excellent chemical resistance
- Fast cure
- Tough abrasion resistant film
- Suitable for potable water use (complies with ANSI/NSF Standard 61) *
- Tested and approved to AS 4020:2005 for potable water service (see Approvals NZ/AU, page 4)
- Excellent flexibility
- Excellent corrosion protection
- Impact resistant
- High-build application in one coat
- Low temperature cure 2°C (35°F)
- * (Valid if manufactured at a certified location.)
Description:
Phenoline 341 is a solventless epoxy lining for a variety of cargos including water, potable water, wastewater, seawater, fuels, crude oils, and other solutions. It is applied by standard airless spray equipment, as a single coat lining for ballast tanks or other storage vessels. It is internationally acceptable** for use as a lining for potable water tanks and pipes.
-
Phenoline 353 LT
Features:
- Outstanding overall chemical resistance
- Dense, highly cross-linked film for superior barrier protection
- Excellent abrasion resistance and toughness
- Well-suited for hydrocarbon exposures
- Cures down to 2°C
- Meets NORSOK System 7C requirements for subsea equipment up to 180°C (356°F)
- Approved for use in food & dairy processing plants (refer to "Approvals NZ/AU" section)
Description:
Phenoline 353 LT is a highly cross-linked epoxy lining with extraordinary overall chemical resistance and versatility. It has a unique blend of resins that make it highly resistant to a variety of aggressive cargoes like gasoline, gasoline blends, biodiesel, fuel oils, and others. It can be used in both acidic and high temperature caustic exposures. Markets served are terminals, refineries, petrochemical, wastewater, railcar linings, subsea oil and gas equipment, and many others. This low temperature cure formulation allows application and curing down to 2°C.
-
Phenoline Tank Shield
Features:
- Batch mix formulation, single leg airless spray
- High impact resistance
- Superior adhesion to steel
- Excellent resistance to water and salt water
- Resistance to a broad range of fuels including ethanol
- Passes EI 1541 requirements for internal protective coating systems used in aviation fuel handling systems, including the jet fuel gum test
- Resistant to hot water up to 82°C
- Excellent abrasion resistance and flexibility
- Can be applied down to 2°C
- Can be applied as a single or multi-coat system
- NSF/ANSI 61 compliant for use in potable water tanks, pipes, and valves.*
- Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600
- Non-blushing with a long recoat window
- Tested and approved to AS/NZS 4020:2018 (refer to "Approvals" section)
- Low odour
Description:
This product is a solvent-free, high performance epoxy coating designed as an internal tank, valve and pipe lining for chemical or other commodity storage. It is a unique blend of resins and curing agents that allow batch mixing for ease of application. Plural component spray equipment is not required. The product is blush resistant and is typically applied at film thicknesses of 500 microns or thicker as needed (tank floors). It can handle exposures typically seen in the oil and gas industries; crude oils and fuels. It is resistant to NGL condensates, produced water, brines, industrial process water, waste water, and sewage. Ideal for municipal wastewater and water treatment facilities.
-
Phenoline Tank Shield FP
Features:
- Highly penetrating formula to handle severe pitting
- Blast hold protection
- Batch mix formulation, single leg airless spray.
- Superior adhesion to steel
- Excellent abrasion resistance and flexibility
- Can be applied down to 2°C
- Can be used with multiple lining systems
- Non-blushing with a long recoat window
- Convenient packaging for batch mix
- Tested and approved to AS/NZS 4020:2018 when topcoated with Phenoline Tank Shield (refer to data sheet)
- Low odour
Description:
This product is a solvent-free, high performance epoxy coating specifically designed as a pit filling primer with ideal flow properties allowing it to wet-out and fill moderate to severe pitting on steel tank bottoms. It's unique formula allows batch mixing for ease of application. With an appropriate lining, it can withstand exposures typically seen in the oil and gas industries. It is resistant to crude oil, NGL condensates, produced water, brines, and industrial process water.
-
Plasite 3070 L
Features:
Description:
A bake coating using a phenolic resin (baked, unmodified) with superior resistance to sulfuric acid and solvents. Conforms to most VOC regulations. Tank lining for solvent, concentrated sulfuric acid, hot water, food products and as a protective coating for machinery parts, filter press plates, fans, etc. PLASITE 3070 L meets the FDA requirements for 21 CFR, 175.300.
-
Plasite 4301 HT
Features:
- Outstanding resistance to aggressive chemicals
- Suitable for use as a highly chemically resistant lining
- Excellent for splash, spill and film exposures on structural steel
- Glass-flake reinforced film
- High tensile and flexural strength
- High film thickness
Description:
This high performance glass-flake filled coating was designed for application over steel or concrete in extreme chemical exposures. It is resistant to a wide variety of aggressive chemicals, including organic and inorganic acids, most alkalies, and many solvents. It is ideally suited for immersion service as internal steel tank linings, as well as for aggressive chemical splash, spill, and fume exposures on structural steel. Typical uses include steel tank and vat linings, secondary containment, structural steel, process floors, grating, sumps and trenches, scrubbers, and clarifiers.
-
Plasite 4550
Features:
- High Impact Resistance
- Superior adhesion to metal substrates and concrete
- Outstanding adhesion to stainless steel, even with low blast profiles
- Well suited to protect alloy steels typically used to wet FGD systems where pitting and crevice corrosion often occur
- Fast cure-to-service; depending upon application can be placed into service within 36 hours
- Minimal blushing characteristics
- Can be applied in temperatures as low as 35 °F (1.7 °C)
- Can be applied as a one-coat system
- Tested and approved for crude oil transportation up to 350 °F (177 °C)
- Superior thermal shock resistance from -40 to 350 °F (-40-177 °C)
- Complies with the API RP 652 definition of a reinforced liner.
Description:
PLASITE 4550 is a 100% solids, reinforced, premium novolac epoxy coating for internal tank lining. It is resistant to a broad range of chemicals such as fuels, salts, alkalis, strong inorganic acids, some solvents, sour crude oil and 98% sulfuric acid.
-
Plasite 4550 S
Features:
- High impact and thermal shock resistance
- Superior adhesion to steel and concrete
- Resistance to a broad range of chemicals
- Can be applied up to 60 mils in one coat
- Can be sprayed using single component airless equipment
- Passes ASTM G210 - Severe Waste Water Analysis Test (SWAT)
Description:
PLASITE 4550 S is a 100% solids, flake filled, premium novolac epoxy coating designed for internal steel and concrete substrates. It is a two component system consisting of four-parts by volume of Part A resin and one part by volume of Part B hardener. It is applied by plural component or single component spray equipment, from a total thickness of 20-60 mils (500-1500 microns) in a single coat application for a variety of applications. This product has been tested and is approved for crude oil storage and transportation up to 350°F (177°C). It has superior thermal shock resistance over the range -40° to 350°F (-40 to 177°C). Typical Uses: Crude oil tankers, chemical storage tanks, wastewater clarifiers, plating vats, oil storage tanks, catwalks, pulp and paper liquor tanks or concrete exposures in wastewater applications.
-
Plasite 7122
Features:
- Versatile coating with wide chemical resistance
- Excellent abrasion resistance
- Excellent thermal shock resistance
- Excellent resistance to fuels
- Long history of performance
- Self-priming
Description:
This lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures. It is suitable for use in food-grade service where product purity (taste and odor) are critical. It has excellent abrasion and thermal shock resistance.
-
Plasite 7122 HAR
Features:
- Versatile coating with wide chemical resistance
- Outstanding abrasion resistance
- Excellent thermal shock resistance
- Excellent resistance to fuels
- Long history of performance
- Self-priming
Description:
This lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures. It is suitable for use in food-grade service where product purity (taste and odor) are critical. Specially formulated with high abrasion resistant fillers for outstanding abrasion and thermal shock resistance.
-
Plasite 7122 TFE
Features:
- Versatile coating with wide chemical resistance
- Excellent abrasion resistance
- Excellent thermal shock resistance
- Excellent resistance to fuels
- Long history of performance
- Self-priming
Description:
This lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures. It is suitable for use in food-grade service where product purity (taste and odor) are critical. It has excellent abrasion and thermal shock resistance. It has superior release properties to reduce or avoid issues with product cargoes such as sticking, hang-ups or bridging.
-
Plasite 7122 VAR
Features:
- Excellent overall chemical resistance to a wide range of acids, alkalies and solvents.
- Superior abrasion resistance and good flexibility
- Complies with FDA 21CFR 175.300 criteria for food contact
Description:
A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VAR, is an abrasion resistant tank lining and industrial maintenance coating.
-
Plasite 7122 VOC
Features:
- Excellent overall chemical resistance to a wide range of acids, alkalies and solvents.
- Very good abrasion resistance and flexibility
- Complies with FDA 21CFR 175.300 criteria for food contact
Description:
A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VOC is used as a tank lining and for industrial maintenance.
-
Plasite 7122 VTF
Features:
- Excellent overall chemical resistance to a wide range of acids, alkalies and solvents.
- Smooth non-stick surface.
- Very good abrasion resistance and flexibility.
- Complies with FDA 21CFR 175.300 criteria for food contact.
Description:
A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VTF, is a PTFE filled tank lining for use where the surface requires release properties to reduce product sticking and bridging.
-
Plasite 7159
Features:
- Easy-to-apply high performance thin film lining
- Protects I high temperature demineralized water immersion - 212°F (100°C)
- Recommended in high pressure three phase service up to 250°F (121°C)
- Can be air dried or force cured for prompt service
Description:
A water-resistant, phenolic epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry.
-
Plasite 7159 HAR
Features:
- Easy-to-apply high performance thin film lining
- Protects I high temperature demineralized water immersion - 212°F (100°C)
- Recommended in high pressure three phase service up to 250°F (121°C)
- Can be air dried or force cured for prompt service
- Outstanding abrasion resistance
Description:
A water-resistant, phenolic epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry. This HAR version of Plasite 7159 is extremely abrasion resistant.
-
Plasite 9060
Features:
- Excellent overall chemical resistance to a wide range of acids, alkalies and solvents
- Very good abrasion resistance and flexibility
- Complies with FDA 21 CFR 175.300 criteria for food contact
Description:
A high solids modified epoxy cured with an amine adduct curing agent. Designed specifically as a highly chemical-resistant, non-toxic, tank lining.
-
Plasite 9060 LT
Features:
- Outstanding overall chemical resistance
- Dense, highly cross-linked film for superior barrier protection
- Superior immersion resistance
- Excellent abrasion resistance and toughness
- Well-suited for hydrocarbon exposures
- Formulated for use in a large variety of facilities including waste water, chemical and fuel storage, wet-gas pipelines, rail cars, barges and ship tanks
- Bis A free
- Cures down to 35°F (2°C)
Description:
Plasite 9060 LT is a high performance tank lining with curing characteristics allowing the coating to be applied and cure at temperatures as low as 35°F (2°C) while achieving unmatched chemical resistance in caustic, acid, solvent and ethanol service. The diversity of chemical resistance and unique low temperature curing allows the owner flexibility with their equipment. For industrial use only.
-
Polyclad 767
Features:
- Fast curing rate increases throughput
- Superior wetting properties result in better edge retention and excellent adhesion to steel
- Mix ratio of 1:1 and user friendly application properties
- Unlimited build with single multi-pass coats
- Self priming (120 mil maximum for potable water)
- Meets AWWA C222
- UL approved for ANSI/NSF Std. 61 potable water
Description:
Polyclad 767 is a top-tier pipe coating engineered for superior performance in safeguarding both pipeline interiors and exterior pipes. Specifically formulated to excel in various applications, this cutting-edge coating is designed to provide exceptional protection for water transmission pipelines, wastewater treatment facilities (both municipal and industrial), and interior tank linings. Elevating its versatility, Polyclad 767 extends its protective prowess to include exterior pipe services, ensuring comprehensive coverage for both the interior and exterior surfaces.
-
Polyclad 777 Fast-Set
Features:
- Fast curing rate increases throughput
- Excellent abrasion resistance
- Superior wetting properties for outstanding adhesion
- Mix ratio 1:1 and user friendly application properties
- Can be topcoated with Carbothane series of products
- Unlimited build with single multi-pass coats
- Compliant with AWWA C222
- Compliant with EN 10290
Description:
Polyclad 777 Fast Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.
-
Polyclad 777 Medium-Set
Features:
- Rapid curing to increase through put
- Excellent abrasion resistance
- Superior wetting properties for outstanding adhesion
- Robust 1:1 mix ratio and user friendly application properties
- Can be topcoated by Carbothane aliphatic polyurethanes
- Unlimited build with single multi-pass coats
- Compliant with AWWA C222
Description:
Polyclad 777 Medium Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.
-
Polyclad 777 PL
Features:
- Rapid curing to increase plant throughput
- Excellent abrasion resistance for use as a rock shield, slip bore and in directional drill applications
- Superior wetting properties for outstanding adhesion
- Mix ratio of 1:1 with easy application properties
- Can be topcoated by Carbothane series of products
- Unlimited film-build with single or multi-pass coats
Description:
Polyclad 777 PL is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a fast-set cure mechanism. No primer is required.
-
Polyclad 777 Slow-Set
Features:
- Fast curing increases throughput
- Excellent abrasion resistance
- Superior wetting properties for outstanding adhesion
- Mix ratio 1:1 and user friendly application properties
- Can be topcoated by Carbothane series of products
- Unlimited build with single multi-pass coats
- Compliant with AWWA C222
- Compliant with EN 10290
Description:
Polyclad 777 Slow Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.
-
Polyclad 777R
Features:
- Low temperature cure
- Quick cure to handle
- Superior wetting properties and outstanding adhesion to steel
- Excellent edge retention
- Mix ratio of 1:1 and user friendly application properties
- Up to 80 mils build with a single application
- Can be topcoated with Carbothane Series polyurethanes for long-term color and gloss retention
Description:
Polyclad 777 R is a high performance, 100% solids structural polyurethane designed to repair Polyclad 777 or 777 PL when it has been damaged. It can be used on steel pipe exteriors, coating girth welds on steel pipe and other repairs as recommended.
-
Polyclad 951
Features:
- Improves flow efficiency in gas pipes
- Excellent flow and leveling
- Single-coat application
- Hard, smooth, glossy finish
- Excellent abrasion resistance
- Meets all criteria of API RP 5L2
- Long pot life
Description:
Polyclad 951 flowliner is an epoxy lining for “dry” natural gas transmission pipelines. It is designed to increase flow efficiency of natural gas in pipelines. This lining provides a smooth surface inside the pipe that will increase flow and reduce energy cost of transporting natural gas. Polyclad 951 offers corrosion protection of pipes during storage. It fully meets criteria of API RP 5L2 for gas transmission pipelines.
-
Polyclad 952
Features:
- Improves flow efficiency in gas pipes
- Excellent flow and leveling
- Single-coat application
- Hard, smooth, glossy finish
- Excellent abrasion resistance
- Meets all criteria of API RP 5L2
- Corrosion prevention during storage
Description:
Polyclad 952 flowliner is an epoxy lining for “dry” natural gas transmission pipelines. It is designed to increase flow efficiency of natural gas in pipelines. This lining provides a smooth surface inside the pipe that will increase flow and reduce energy cost of transporting natural gas. Polyclad 952 offers corrosion protection of pipes during storage. It fully meets criteria of API RP 5L2 for gas transmission pipelines.
-
Polyclad 956
Features:
- Improves flow efficiency in gas pipes
- Meets API RP5L2 requirements for gas transmission pipeline flow liner
- Excellent flow and leveling
- Single-coat application
- Hard, smooth, glossy finish
- Excellent abrasion resistance
- Corrosion prevention during storage
Description:
A solvent-less, high gloss, smooth epoxy coating for the lining of gas transmission pipelines. It’s hard, smooth surface aids in the flow of gas by reducing turbulence while protecting the interior surfaces from corrosion. It has excellent flow and wetting characteristics ideal for this type of application and use. Tested in accordance with API RP 5L2 for gas transmission pipelines.
-
Polyclad 975
Features:
- Quick dry to touch and QC times
- Color indicator confirms proper mixing
- Low temperature cure 40°F (4.4°C)
- Excellent cathodic protection performance
- Film build up to 50 mils DFT in one coat
- Excellent edge retention
- Superior adhesion to steel
- Excellent adhesion over prepared FBE, epoxy and polyurethane coated pipe
- Can be applied by spray, brush, roller or dual cartridge
Description:
Polyclad 975 is an advanced 100% solids, hybrid epoxy pipeline coating. Polyclad 975 has performance properties designed for corrosion protection of steel and ductile iron pipe exteriors, girth welds or tie-ins. It can be used for new pipe or rehabilitation of coated pipe. Polyclad 975 cures fast to allow quick QC and backfill times.Polyclad 975 is designed for spray application. Use Polyclad 975 H for hand applied applications.
-
Polyclad 975 H
Features:
- Quick dry to touch and QC times
- Good brush and roll properties
- Color indicator confirms proper mixing
- Low temperature cure 40°F (4.4°C)
- Excellent cathodic protection performance
- Film build up to 30 mils DFT in one coat
- Excellent edge retention
- Superior adhesion to steel
- Excellent adhesion over prepared FBE, epoxy and polyurethane coated pipe
- Can be hand applied by brush or roller
Description:
Polyclad 975 H is an advanced 100% solids, hybrid epoxy pipeline coating. It has performance properties designed for corrosion protection of steel and ductile iron pipe exteriors, girth welds or tie-ins. Polyclad 975 H cures fast to allow quick QC and backfill times. H in 975 H stands for hand applied version. Polyclad 975 is the spray version.
-
Polyclad ARO
Features:
- Excellent gouge and abrasion resistance
- High crosslink density results in tough film
- Excellent adhesion to prepared FBE, Polyclad 975 and other coatings
- Protects FBE, and other base coats during directional drilling applications
- Zero VOCs, 100% solids
- Apply up to 125 mils (3.2 mm) in one application
- Rapid dry to handle, less than 20 minutes
Description:
Polyclad ARO is a high performance pipe coating specially designed for the protection of FBE coated pipeline from gouge and mechanical damage during directional drilling or slip bore installations. Polyclad ARO is applied directly over FBE as an abrasion resistant overlay (ARO) and provides superior protection in rocky, rough and mountainous environments. It absorbs the destructive energy and minimizes coating damage.
-
Pyroclad X1
Features:
- Full jet fire certification in accordance with ISO 22899
- Excellent hydrocarbon pool fire protection (ISO 834/BS-476)
- LR, DNV & ABS certification
- Successfully passed Norsok M-501 System 5A environmental test program without a topcoat
- Superior weathering resistance
- Very low moisture absorption
- Explosion resistance
- Extremely durable, impact resistant finish
- High film build properties
- Low flame spread and smoke development
Description:
Pyroclad X1 is designed to provide jet fire and hydrocarbon fire protection for structural elements, beams, columns, bulkheads, underdecks and risers. Pyroclad X1 is suitable for applications in the industrial, petrochemical, oil and gas, offshore and refining industries.
-
Pyrocrete 241
Features:
- Over 40 years of proven performance
- Exceptional durability and toughness
- Tested and approved for exterior use by Underwriters Laboratories Inc
- UL 1709 hydrocarbon fire rated up to 4 hours
- BS 476 hydrocarbon fire rated up to 4 hours
- ISO 22899-1 jet fire rated up to 2 hours
- ASTM E119 cellulosic fire rated up to 4 hours
- Cryogenic protection against LNG spills and immersion exposures
- Resistant to 3 bar blast overpressure
- Hose stream resistant
- Tolerant to wide range of climates
- Lightweight – one-fifth the weight of concrete for equal fire protection
- Ideal for onsite and offsite application
- Easy application by spray or trowel
- Nonflammable – during or after application
- Chloride and sulfide free – no special priming required
- Asbestos-free – complies with EPA and OSHA regulations
- Non-friable – high impact strength
Description:
A 55 lb./ft³ (881 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.
-
Pyrocrete 40
Features:
- Cost effective fireproofing solution
- Outstanding coverage, high build
- Exceptional durability and toughness
- UL 1709 hydrocarbon fire rated up to 4 hours
- BS 476 hydrocarbon fire rated up to 4 hours
- ISO 22899-1 jet fire rated up to 2 hours
- ASTM E119 cellulosic fire rated up to 4 hours
- Cryogenic protection against LNG spills and immersion exposures
- Resistant to 3 bar blast overpressure
- Hose stream resistant
- Tolerant to wide range of climates
- Typically field applied at a 40 - 50 lb./ft³ (640 - 800 kg/m³) dry density
- Lightweight – one-fifth the weight of concrete for equal fire protection
- Easy application by spray or trowel
- Nonflammable – during or after application
- Chloride and sulfide free – no special priming required
- Asbestos-free – complies with EPA and OSHA regulations
- Non-friable – high impact strength
Description:
A minimum 40 lb./ft³ (640 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.
-
Reactamine 760
Features:
- UL approved for ANSI/NSF Std. 61 potable water*
- Potable water approved to AS 4020:2005 (see Approvals NZ-AU, page 4)
- Complies with 21 CFR 175.300 Method D, E, & G and Direct Dry Food Contact
- Complies with Greenbook
- Cold temperature cure
- Fast cure and walk on time
- Excellent barrier properties, low permeability
- Single-coat application 1500 to 3000 microns
- Bridges normal shrinkage cracks in concrete
- True monolithic film on steel and concrete
- Encapsulates rivets, bolts, and edges in one coat
- Outstanding abrasion, impact and tear resistance
- Combines the advantages of polyurethane and polyurea technologies to form a high performance hybrid polyurethane
Description:
Environmentally friendly, advanced hybrid technology, plural-component applied coating used as a lining for water, wastewater, manholes, penstocks, dam gates, pipelines and other aggressive immersion applications. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service.
-
Reactamine 760 HB
Features:
- High film build (5000 microns / 5mm plus) in one coat
- Complies with Greenbook
- UL approved for potable water*
- Cold temperature cure
- Fast cure and walk on time
- Excellent barrier properties, low permeability
- Can be used to resurface highly deteriorated concrete
- Bridges normal shrinkage cracks in concrete
- True monolithic film on steel and concrete
- Encapsulates rivets, bolts, and edges in one coat
- Outstanding abrasion, impact and tear resistance
- Combines polyurethane and polyurea technologies to form a hybrid polyurethane
Description:
Environmentally friendly, advanced hybrid technology, plural-component applied coating used as a lining for water, wastewater, manholes, penstocks, dam gates, pipelines and other aggressive immersion applications. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service. Ultra high build product designed to be applied at high thickness in one coat application.
-
Reactamine Joint Seal FC
Features:
- 100% solids; zero VOC
- Fast cure times
- USDA compliant for non-direct food contact
- Has a functional temperature range of -18°C to 121°C
- Excellent water resistance, chemical resistance, and thermal stability at high & low temperatures
- Works well with asphalt or concrete
Description:
Reactamine Joint Seal FC is a 2-component 100% solids, polyurea-based joint sealant that is self-leveling and cures in approximately 30 minutes. It works equally well with asphalt and concrete and protects interior horizontal concrete expansion and control joints from spalling, chipping and breakdown. This product can be applied at temperatures ranging from -18° to 65°C and possesses excellent chemical resistance, water resistance and thermal stability at both high and low temperatures.
-
RIPO
Features:
- Thin penetrating liquid which dries to a non-tack film
- Anti-corrosive
- Water resistant
- Easy application
- Multi-purpose
- Can be overcoated with High Build Rust Barrier or Multi~Bond Primer
- Single pack-ready to use
Description:
RIPO (Rust Inhibiting Penetrating Oil) is a drying “wetting oil” pre-treatment, for use on hand or power tool cleaned surfaces and sometimes with brush blasted surfaces, prior to application of High Build Rust Barrier and other alkyd coatings. RIPO forms a water-resistant film and is useful in protecting steel from condensation corrosion as encountered on: • Interior of vehicle doors and body panels • Underside of surfaces on appliances, such as freezers and washing machines • Marine topsides • Excellent rust treatment as part of a single pack coating system on; agricultural machinery and various pieces of equipment, trailers, structural steel
-
Sanitile 120
Features:
- Excellent primer/sealer for drywall
- Glue-like bond to almost any surface
- Outstanding tie-coat over existing coatings
- Single component, thin-film application
- Topcoat with virtually any generic coating
- Ready-to-apply as supplied
- Fast drying
- Low odor; low VOC
- Suitable for use in USDA inspected facilities
Description:
Universal bonding primer that adheres tenaciously to virtually any surface including galvanized and stainless steel, aluminum, PVC, FRP and ceramic tile. It can also be used on porous and high PH substrates (up to 12.5) like concrete and cementitious patching compounds.
-
Sea~Barrier 1000
Features:
- TBT-free (Tri-Butyl Tin-free) antifouling
- Self polishing/ablative mechanism inhibits the attachment of fouling organisms
- Cost effective performance for commercial applications
- Controls common types of fouling for periods up to 12 months, depending on sailing pattern and applied system
- Compatible with most suitably prepared copper based antifoulings
Description:
Sea~Barrier 1000 is a cost effective ablative antifouling coating, designed for commercial applications. It is ideal for vessels that are dry-docked annually. Sea~Barrier 1000 is the ideal antifoul coating for: • In-shore commercial vessels and barges subject to light to medium duty • Use on bottom flats and as a boot-top in conjunction with Sea~Barrier 3000 on critical areas Note: For 12 – 24 months service refer to Sea~Barrier 3000.
-
Sea~Barrier 3000 AU
Features:
- High performance TBT-free (Tri-Butyl Tin-free) antifouling
- Self polishing/ablative mechanism inhibits the attachment of fouling organisms
- Excellent static exposure performance
- Increased periods between dry dockings leading to reduction in operating costs
- Case histories to 5 years protection
- Extended 2-3 day overcoating window when applied over Carboguard 504. Refer to Technical Services for further advice
Description:
Sea~Barrier 3000 is a high performance, high copper loading, tin-free, ablative antifouling utilising an engineered binder matrix resulting in a controlled and effective release of biocide during operation over extended service periods. Sea~Barrier 3000 is the ideal antifouling coating for: • New builds & maintenance docking • Barges & Tug-Boats • Ferries & Fishing Vessels • Charter Vessels & Yachts • Multi-season antifouling protection
-
Sea~Barrier 3000 NZ
Features:
- High performance TBT-free (Tri-Butyl Tin-free) antifouling
- Self polishing/ablative mechanism inhibits the attachment of fouling organisms
- Excellent static exposure performance
- Controls common types of fouling for periods up to 36 months (depending on sailing pattern, applied system and other factors)
- Increased periods between dry dockings leading to reduction in operating costs
- Case histories to 5 years protection
- Extended 2-3 day overcoating window when applied over Carboguard 504. Refer to Technical Services for further advice
Description:
Sea~Barrier 3000 is a high performance, high copper loading, tin-free, ablative antifouling utilising an engineered binder matrix resulting in a controlled and effective release of biocide during operation over extended service periods. Sea~Barrier 3000 is the ideal antifouling coating for: • New builds & maintenance docking • Barges & Tug-Boats • Ferries & Fishing Vessels • Charter Vessels & Yachts • Multi-season antifouling protection
-
Sea~Barrier Altra NZ
Features:
- Suitable for both maintenance docking and new builds
- Improved performance at lower builds
- Latest generation controlled hydrolysis Silyl Acrylate Polymer technology
- Micro fine, engineered cuprous oxide technology
- Developed & tested over several years, and proven in the most severe marine conditions
- Highly predictable & stable self-polishing hydrolysis action maintains full-time antifouling activity, reducing friction and drag
- Improved adhesion to primers, build coats and existing antifoulings being repainted and fully compatible when applied over Sea~Barrier 3000
- Very good static exposure performance
- Superior mechanical strength – avoids cracking & peeling
- Controls common types of fouling for extended periods* & provides an easy to maintain surface between dockings (film build dependant - *see Disclaimer under Limitations section)
Description:
Sea~Barrier Altra is a new, patented silyl acrylate polymer based antifouling designed to protect hulls from marine growth through an outstanding controlled self polishing hydrolysis action - the silyl acrylate, cuprous oxide and co-biocide combination provides exceptional multi-season protection. Extensive testing and sea trials show Sea~Barrier Altra to be providing exceptionally cost effective, long term protection for commercial & deep water use. Ideal for work vessels of virtually any description such as fishing fleets, tugs and barges, container ships, passenger and vehicle ferries, and vessels trading in deep sea or coastal waters.
-
Semstone 110
Features:
- Outstanding wetting properties
- Solvent-free
- Long working time
- Excellent adhesion
- Compatible with a variety of toppings
Description:
Two part epoxy exhibiting superior adhesion to concrete and steel. Used primarily as a primer/sealer for concrete surfaces and top coated with a variety of chemically resistant toppings.
-
Semstone 140
Features:
- Excellent resistance to chemical attack
- Excellent abrasion and impact resistance
- Exceptional thermal shock resistance
- Superior bonding properties
- High cohesive strength
- Low permeability
- Low odor
Description:
High performance lining system designed for concrete. Semi-leveling coating which may be applied as an aggregate filled and/or reinforced coating system. Specially formulated to withstand some of industry’s most aggressive chemicals.
-
Semstone 145
Features:
- Excellent resistance to chemical attack
- Excellent abrasion and impact resistance
- Exceptional thermal shock resistance
- Superior acid resistance
- Superior bonding qualities
- High cohesive strength
- Low permeability
- Low odour
Description:
100% solids, high performance, novolac epoxy lining system designed for concrete. It is a semi-leveling coating and may be applied as an aggregate filled and/or reinforced coating system. Specially formulated to withstand some of industry’s most aggressive chemicals, including 98% sulfuric acid, as well as many organic chemicals and solvents.
-
Semstone 145 SL
Features:
- Excellent resistance to chemical attack
- Excellent abrasion and impact resistance
- Exceptional thermal shock resistance
- Superior adhesion to both steel or concrete
- High cohesive strength
- Low permeability
- Low odor
Description:
High performance, 100% solids, novolac epoxy coating designed for concrete protection against chemical attack and physical abuse. This coating has been specially formulated with vertical film build characteristics for application to walls (and floors alike) to provide an outstanding barrier against some of industry’s most aggressive chemicals, including 98% sulfuric acid as well as many organic chemicals and solvents.
-
Southwest Type 5GP
Features:
- Assessed in accordance with AS 1530.4:2005 (see "Approvals NZ/AU" section)
- Assessed in accordance with AS 4100 (see "Approvals NZ/AU" section)
- Provides protection for I-section and hollow beams and columns up to 240 FRR (4 hours)
- Certified data available for limiting temperatures ranging from 350°C to 700°C
- Non-combustible
- Can be injected with Accelerator A-20 for fast set and increased yield (optional)
- Excellent film builds on all surfaces including columns, beams and decks.
- Applicator friendly – High film build, no alum required for increased coverage*.
- Asbestos-free – complies with EPA and OSHA regulations.
- Mineral Wool free – no airborne fibres.
- Styrene free – no toxic decomposition gases.
- Economical – Maintains project on budget.
- Design flexibility with over 100 UL designs
Description:
A 240 kg/m³ (15 lb./ft³) SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours. Southwest Type 5GP is a trademark of the Southwest Fireproofing Products Company.
-
Splash Zone A-788
Features:
- Designed for underwater and other wet applications
- Can be applied up to 50 mm (2") in thickness
- Self-priming on most surfaces and over most generic types of coatings
- Rapid cure characteristics
- VOC compliant to current AIM regulations
Description:
Solvent-free patching compound used for repairing pits, cracks and voids in steel, concrete, wood and other surfaces. Has the unique ability to be mixed, applied and cured underwater.
-
Thermaline 400
Features:
- Temperature resistance to 204°C (400°F)
- Very good flexibility
- Excellent overall chemical resistance
- Very good abrasion resistance
- Easily applied by spray
- Acceptable for use over stainless steels
Description:
A high performance immersion-grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures. It is typically used on hot steel substrates under insulation operating up to 204°C (400°F). it has excellent chemical resistance properties to handle the corrosive effects of wet insulation under thermal cycling conditions. Thermaline 400 is typically used as a two coat primer & finish system.
-
Thermaline 450
Features:
- Temperature resistance up to 232°C (450°F)
- High-build single-coat capabilities
- Excellent resistance to thermal shock
- Superior abrasion and chemical resistance
- Glass flake reinforcement
- Ambient-temperature cure
Description:
Highly cross-linked, glass-flake filled polymer that offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures. Suitable for insulated or uninsulated pipes (refer to Limitations), stacks and equipment operating up to 232°C (450°F). This coating provides excellent resistance to corrosion, abrasion and permeation, and its novolac-modification resists severe chemical attack. This extreme performance product has decades of performance and is recommended for CS-1,3,4 and SS-1,2,3 systems of NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI).
-
Thermaline 4700 Aluminium
Features:
- Resistant to severe thermal shock
- Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
- Provides barrier protection prior to heat curing (full film physical properties occur after heat curing)
Description:
High-performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C-538°C (400°F-1000°F). Requires heat curing.
-
Thermaline 4900 Aluminium
Features:
- Temperature resistance up to 273°C (525°F)
- Single-coat application
- Excellent resistance to thermal shock
- Good weathering and colour stability
Description:
Air-dried coating suitable for high temperature exposures up to 273°C (525°F). Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Heat cure above 150°C (300°F) is recommended and will impart added strength and integrity to the coating.
-
Thermaline Heat Shield
Features:
- Unique reinforced but flexible polymer film
- Versatile use from cryogenic to 650°C (1200°F) exposures
- Dries to handle without heat cure (See curing schedule)
- Outstanding barrier properties
- Protects steel from thermal wet cyclic conditions
- Suitable for both shop and field application
- Provides corrosion protection even with ambient temperature cure
- Self priming or apply over Carbozinc 11 primers when uninsulated
- Protects stainless steels from chlorides and stress corrosion cracking
- Very fast recoat times
Description:
This is an extreme performance coating for hot, cryogenic and cycling exposures. Thermaline Heat Shield contains a unique blend of plate-like reinforcing pigments fortified with an inert polymeric matrix. The resulting film provides an outstanding barrier against corrosives and harsh exposures typically seen in elevated temperature environments. This versatile coating is ideal for all piping, vessels and equipment operating from cryogenic conditions up to 650°C (1200°F). It is particularly well suited to prevent corrosion under insulated equipment/piping for both carbon steel substrates and stainless steels. This fortified coating has superior shop handling properties over standard silicone coatings (see Curing). It is recommended for CS-6 and SS-5 systems of NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI).
-
Thermo-Lag 270
Features:
- Flexible
- Hard, dust free surface
- Allows easy replacement of cables
- Water-based product, low odour
- Asbestos-Free – complies with EPA and OSHA regulations
- Factory Mutual – tested and approved
- Does not de-rate cables
- Weathering – approved for exterior use
- Quality Manufactured – under strict Carboline quality standards
- Provides protection at 1.6mm Dry Film Thickness
Description:
A water based mastic that can be applied to electrical cables to retard fire propagation. Once applied, it meets code and insurance requirements for interior and exterior use. It provides a hard and flexible surface that will not dust, flake, or spall.
-
Thermo-Lag 3000-SP
Features:
- Provides a flexible fire protection solution to structural steelwork, process vessels, divisions and electrical raceways for 1 through 4 hours.
- Lowest thickness per fire rating of any competitive epoxy intumescent coating.
- Inherently flexible and durable formulation designed to withstand abrasion, vibration, handling, transportation and erection stresses in any climate.
- Formulated to maintain it’s flexibility, elongation and fire resistive properties throughout its service life regardless of climate.
- Engineered to resist extreme and rapid temperature cycles without cracking or disbondment.
Description:
Thermo-Lag 3000-SP is a flexible, two-component epoxy Intumescent Fireproofing coating designed to provide asset integrity from the damaging effects of hydrocarbon fires. Since 1999 Thermo-Lag 3000-SP has provided fire protection in the harshest of environments, such as oil, gas, refineries, power, marine, petrochemical, and LNG facilities. Thermo-Lag 3000-SP has been extensively and independently tested in accordance with: UL 1709, UL 2431 Category I-A, ISO 834-3, IMO FTP Code (IMO A.754(18) for H-0, H-60 & H-120 Divisions, ASTM E84, ASTM E119, ISO 20340, NORSOK M-501 5A Fire and Corrosion Testing, and NFPA 290 (extended to 150 minutes).
-
Thermo-Lag E100 S
Features:
- Certified to UL 263 / ASTM E119 / NFPA 251
- Exterior and interior rated
- High quality aesthetic finish
- Does not require reinforcing mesh
- Low thickness requirements
- High build, fast recoat
- Saves application time, lowering installation cost
- Rugged durable material suitable for onsite or offsite applications
- LEED compliant, low VOC
- Low outgassing properties for clean room environments
Description:
An epoxy intumescent fireproofing for commercial and light industrial applications. It was specifically designed with an advanced formulation to provide 1-3 hour cellulosic fire protection for structural steel beams, I-section columns, tubular columns and pipes without the need for reinforcing mesh. It provides a fast curing, aesthetically pleasing fire protection solution and is rated for both exterior and interior applications.
-
V-102E Vinyl Finish Aluminium
Features:
- Conforms to US Army Corps of Engineers formulation requirements
- Excellent adhesion to metal / concrete when used in conjunction with V-766E Primer Intermediate
- Good recoatability, even after weathering
- Excellent resistance to mineral oils, grease, and many chemicals
- Fast drying
- Excellent flexibility & impact resistance
- Good abrasion resistance
- Excellent resistance to prolonged water condensation
Description:
V-102E Vinyl Finish Aluminium is a single pack coating for use over V-766E Vinyl Primer Intermediate and is specifically formulated to protect metal or concrete surfaces in hydraulic structures or exposed to weather, water, and many chemicals.
-
V-766E Vinyl Primer Intermediate
Features:
- Conforms to US Army Corps of Engineers formulation requirements
- Excellent adhesion to metal / concrete when used in conjunction with V-102E Vinyl Finish Aluminium
- Good recoatability, even after weathering
- Excellent resistance to mineral oils, grease, dilute aqueous acids, and alkalis.
- Fast drying
- Excellent flexibility & impact resistance
- Good abrasion resistance
- Excellent water immersion resistance
Description:
V-766E Vinyl Primer Intermediate is a single pack primer for use under V-102E Vinyl Finish Aluminium and is specifically formulated to protect metal or concrete surfaces in hydraulic structures or exposed to weather, water, and many chemicals.
-
Zinc Filler Type III
Features:
- Used in many Carbozinc primers
- Meets the requirements of ASTM D520 Type III
- Lead content below 0.002% (20 ppm)
Description:
No Products Found
